User Manual

!
!
Launching the software/Device Info
The first thing iConfig does when you launch it is scan your system for a few seconds
to determine what’s connected. You can see the green iConnectMIDI
2+
indicator lights
flashing while this is going on."
In the following example we have one unit connected to a Mac:"
(Should any of your iConnectivity devices fail to appear, the most likely culprit is an
unplugged or bad cable, ora powered-off device. Check this and click Refresh.)"
(Should any of your iConnectivity devices fail to appear, the most likely culprit is an
23