User Manual

"
This too is on multiple screens in the iOS version. Start by tapping either the Controller
Input Filters or Controller Output Filters. Tap the port to be filtered on the next screen,
and a screen with the eight filters appears. Select one of the filters and you’ll bring up
the screen to enable or disable filtering on the MIDI channels you want the filter to
apply to: In this case Controller Filter #1 is enabled on Channels 1 and 2."
To get to the list of available controllers, tap the Bank Select (coarse) area and then
select the MIDI controller you wish to filter. MIDI Continuous Controller #1, Modulation,
is being filtered in the following example (scroll down to get to the remaining ones in
the MIDI spec):"
32