User's Manual

plugged in.
UPDATE BUTTON:
Initiates a iControl box to server uplink communication. Used when you need to
manually
update the iControl network with information.
DEVICE BUTTON:
Can be used to enable the iControl box to discover a newly
installed device.
iControl Box back panel
As described in the Installation Guide, the iControl box should not be
plugged into power strips or wall outlets that are connected to or
contain a surge protector or uninterruptible power supply.
The rear view shows the Ethernet port with an Ethernet cable inserted, an insert
for a reset button, a phone jack, and power connector with the power supply
cable inserted. The reset button, marked as ‘RST’, is not functional today and will
not be functional in the shipping product. The phone jack is not supported in
Beta.
3 Using your iControl System
Your iControl System can operate in one of three modes: Home, Sleep or Away.
You can set the mode in one of two ways: the Mode button on your Summary