User's Manual

5 Click on Add and Save.
Tip: You can have different actions occur in different modes. In this
example, the lights are to come on when the Front Door (large) was opened
while the iControl System is set in Away mode. We did not set the lights to come
on in Home mode as the lights would probably be on as friends and family are
around.
Rename a Device
iControl Networks, Inc. adds your device to your system before your Starter Kit
is shipped to you. (If you purchase additional devices after buying your Starter
Kit, you will need to add them to your system. See Chapter 9 Adding Additional
Devices for instructions.) You may wish to rename them in your terms.
To rename your device,
1 Go to the System tab. Click on the name of device you wish to change. In
the Name field, backspace over the old name to delete it and then type in
the new name.
2 Click on the Save button.