User's Manual

Setting up your camera for live video. 6 Save your
changes and close the screen as shown on the router’s
port forwarding setup screen. 7 Close your browser and
return to your iControl Summary page. Select the
thumbnail of the camera that you have enabled for video.
You will be presented with an expanded window. Select
the menu item, Live Video, from the menu bar at the top of
the window. 8 At this point you should see live video. If
you do not, you will be presented with a dialog box
entitled, Camera not Accessible. Click on the button, ‘Test
port forwarding’, to test your port forwarding work. If it
does not test properly, repeat the port forwarding process.
Entering the camera password and ID for Internet Explorer
For some versions of Internet Explorer, you may need to enter the camera user
name and password the first time you attempt to view video from within an
Internet Explorer browser page. You will need to enter this information if Internet
Explorer presents you the dialog box shown below when you select the menu
item, Live Video, from the expanded picture thumbnail in your iControl Summary
page.