User's Manual

7 Using your Lamp Module
Set the brightness level
You can set the brightness of the lights that are controlled by a Lamp module. To
do so, 1 Go to the Summary page. 2 Click on the QuikControl button on the
blue menu bar. 3 Click in the Brightness field to show a drop down menu.
Choose a brightness level
such as 100%. This means the light will be as bright
as it can be. Click on the button labeled ‘Set’. 4 The
change in brightness level will now be displayed in the
Pending window and your iControl System will update
the lamp at the time shown in the Pending window.
Tip: The Lamp Module can only control lights using 40w to 300w
incandescent light bulbs. It cannot control other types of bulbs such as
florescent lights. Also, it is not recommended for 3 way lights or lights controlled
by 3 way wall switches.
Control your Lamp Module
The Lamp Module can be turned on and off in one of three ways:
1 Press the Light button on your Keychain Remote once to turn any light s
controlled by the Lamp Module on or off. If the light is on, pressing the
Light button twice quickly will turn it off. Likewise, if it is off, pressing the
button once will turn it on.
2 Using QuikControl. Go to your Summary page and click on the
QuikControl button. One of the items in the drop down menu will be your
Lamp Module. Select the Lamp module to open its control dialog box.
Select the brightness level you want and click the Set button. In a few
minutes, the iControl box will talk to the Lamp module via iControl’s
servers. Then the Lamp Module will turn on to the selected brightness
level.
3 If you have added turning lights on or off to an automation such as turning
on the lights if a Motion Sensor recognizes a person entering the Sensor’s
monitored area. To set up automation, go to Chapter 3 under Change or
set automation.