User's Manual

In this example, the Thermostat will change its setpoint for cooling to 64 degrees
and the heating setpoint to 76 degrees. (Note, a thermostat device is not part of
your Starter Kit but is available as an optional accessory. Please go to
www.icontrol.com for more information.)
Reminders window Reminders are not implemented in Beta.
Schedules window Schedules are not implemented in Beta.
Details tab This tab presents a listing of all the devices
installed in your system. It displays their current state, images from any cameras
installed in your system, and the current settings and ambient temperature from
any thermostats installed in your system. If you click on any device name, you
will be taken to its device page which provides detailed information about the
device including the device’s name that you chose, the device ID, and
manufacturer. If you click on a photo image, you will be taken to an expanded
view of that image where you can take additional images and access thumbnails
of previously taken images.
Notifications tab By clicking on this tab, you will go to a web
page where you can set notifications for each mode (Home, Away, and Sleep).
For example, you can have an email sent to you when your iControl system is in
Away mode that a device recognizes a change such as a Door/Window Sensor
detecting an open door. See Chapter 3 entitled, Using your iControl System, for
more details on setting and changing notifications.
Automation tab By clicking on this tab, you will go to a web
page where you can set automations. An automation is an action taken by a
device based on the change in the state of another device. For example, a
Door/Window Sensor detects an open door; when this change occurs, a camera
takes a picture.
Schedules tab By clicking on this tab, you will go to a web
page where you can set schedules for your devices. For example, you can set by
time of day or day of week, how devices operate. For example, every night at
10PM, every lamp module changes state causing every light in the house
controlled by a lamp module turn off. This feature is not implemented in Beta.