User's Manual

System tab This tab is most useful for seeing a complete list
of devices in your system and confirming that a device was installed and is
working. The System tab also provides a way to add and delete a device. You
may also access the device page via this tab to change the device’s name or
gather such information as device ID and manufacturer.
Definition of other items on the Summary page
Help button Help which is indicated by a ‘?’ mark is not yet implemented.
Mode Your iControl System has three modes, Home, Sleep and Away. You can
set your System in any of the modes. For example, the system can be in Home
mode while you are home and Sleep mode when you are asleep. The mode
setting affects the behavior of the system. For example, you may want receive
notifications only when you are Away from your home.
QuikControl button QuikControl is shortcut that allows you to have one of your
devices take an action.
Click on the QuikControl button and you will see the actions that you can take.
Two actions are available for the starter kit devices: Have a camera take a
picture and change the brightness of a lamp controlled by the lamp module. (You
will have had to install a camera or a lamp to see these QuikControl actions). A
third action, change the temperature is available if an optional thermostat is
bought and installed.
About your iControl Box