User's Manual

Index
2. Re-position the sensor and the sensor magnet so that the space between
them is smaller. There needs to be a magnetic field between the two
pieces, and they may be too far apart. Wait a few moments to see if the
dot turns green. If the problem persists, re-position the sensors again.
How far away can I install my iControl Door/Window sensor from the
iControl box?
100 feet.
Keychain Remote
What are the default actions of the buttons?
See Section 8.6 in the iControl Users Manual.
The Keychain Remote is doing something it is not supposed to do. What
should I do?
Click on the Automations tab. For each Keychain Remote, you will see the settings for
each button. You may have re-configured the buttons to change their function.
My Keychain Remote isnt doing anything. I press buttons repeatedly.
The Keychain Remote needs a few moments to communicate via infrared with your
iControl box. When you press a button, hold it for a second or two, the LED on the
Keychain Remote should turn green and then after about one minute, your System
initiates the action you wish.
Why doesnt my Keychain Remote lamp button doesnt turn the lamp on or
off?
Pressing the Light button on the Keychain Remote 4-button version alternately sends
Light Button On and Light Button Off signals to your iControl System. So if you use the
Keychain Remote Light button to turn your lights on, then the next signal the Keychain
Remote Light button will send is Light Button Off. However, you may not experience the
desired result. If, for example after turning the lights on with the Keychain Remote Light
button you turn the lights off manually, using QuikControl, or with an automation or
schedule, then pressing the Keychain Remote Light button will send the Light Button Off
signal and no change will occur. Pressing the Light button a second time will send the
Light Button On signal, and the lights will turn on.