User's Manual

Your iControl Personal Web Portal Explained
In this window, you can see the most recent pictures from each of your iControl cameras.
If you place the cursor over a picture, the name of the camera will display, such as ‘Store
- Rear Wired Camera’. You can also expand a picture by clicking on it. In the expanded
view, you can delete the picture, take a new picture, email the picture, view thumbnails of
recent pictures, or watch live video (if port forwarding is enabled). You can also focus
the camera if you are viewing the picture on your local network.
The Pictures window can be customized to show a different set of pictures for each
camera. See My Account
.
Alarm History window
This window shows recent alarms generated by your iControl devices. An alarm occurs
whenever a device detects a change. Your Door/Window sensor may, for instance, detect
an open door, or your Motion sensor may detect a person entering the monitored room.
For each change, the Alarm History window displays the time of the alarm and the
device’s name. In our example, the Back Hallway Motion Sensor generated an alarm
condition at four different times (2:59PM, 2:29PM, 1:37PM, and 1:18PM).
Next to each item in the Alarm History window is a yellow triangle (
), indicating an
alarm condition. You can place your cursor on any triangle to see the device state that