User's Manual

Your iControl Personal Web Portal Explained

and Editing Automations

in Automations.

Schedules tab

You can schedule actions for your devices to perform at particular times of the day and

days of the week. You can also schedule actions to repeat or occur randomly. You can,

for example, have lights come on and stay on from 8PM to 11PM every night.

Alternatively, you can have the lights turn on and off randomly during that time period. A

camera can be scheduled to take a picture every two hours so you can check on store

traffic. A thermostat at your parent’s house or vacation home can be set to turn up during

the breakfast and dinner hours and down during the day and in the evening. For detailed

information on how to add and use schedules, see Adding and Editing a Schedule

Schedules

System tab

You can access the complete list of devices installed in your iControl System via the

System tab. You can check to see if all of the installed devices are working properly. A

green dot indicates that the System is operating properly, while a yellow dot indicates

that the System is still installing the device or is not in communication with it. A red dot

indicates that the device is offline, possibly because it is unplugged. You can add and

delete devices, change their name, and confirm or change their device ID. You can also

see the history of the device (when it was installed or deleted, for example). For detailed

information on how to use the System tab, see Managing Your iControl Devices