User's Manual

Updates Button
The Updates button shows the latest changes you have made to your iControl
System. The updates that are shown in this window are:
x Temperature, mode, and fan setting changes on any thermostats
x QuikControl commands to take a picture
x QuikControl commands to change the brightness level or turn on or off
any lighting controlled by a Lamp module
x Changes to the System mode
The following screen shows examples of these updates.
1. Click on the QuikControl button.
2. Place your cursor over the device you wish to control to open the
QuikControl window.
3. Select the change you want to occur such as ‘Lamp Set Brightness Level’
or ‘Take a picture’.