User's Manual

Printed Documentation
When you log in to your personal web portal, the Setup Assistant will walk you through
setting up each camera that came with your Starter Kit. Simply follow the steps in the
Setup Assistant and you should be up and running in no time.
Determining Your Camera Type
There are two different types of cameras available for use with the
iControl System.
The wired camera will not have an antenna, and requires an
ethernet connection to a local router/cable modem or similar
device.
The wireless camera does have an external antenna (see
image) and can use the wireless setting from the local
router/cable modem or similar device.
Adding an Additional Camera to Your System
Information You'll Need
To begin setting up your additional camera, please have the following information from
your router or similar device:
x IP Address to access your wireless router's administration page
x The username and password to log in to your router
x If you have a wireless camera you will also need:
o Your wireless network's SSID. This is also sometimes called your
network name.
o Your wireless network's Security Mode. This is the type of
encryption used by your wireless network.
o Your encryption key, this is based on the security mode you're
using and may be blank if you're using an open network.
iControl Wireless Camera