User's Manual

Printed Documentation
x The CO detector is for indoor use only.
x Do not install the device above or below heating vents, above cooking
surfaces, or within five feet of open flames; next to windows, exterior
doors, or in locations where furniture or draperies may block the unit; or
near automobile exhaust pipes.
x The device only measures the carbon monoxide levels at its installed
location. Dangerous gas levels could still be present in other areas.
Using Your Carbon Monoxide Detector
Once you have installed a Carbon Monoxide detector in your location, it will appear on
the Summary page of your personal web portal. The status of your CO detector in the
Current States area of your Status window will be either ‘OK’ or ‘Alarm’.
When CO rises to dangerous levels, the CO detector will sound in your location and you
will see ‘Alarm’ and a yellow alarm-condition triangle beside the device in the Current
States area of your Status window, as well as an alarm in the Alarm History window.
Note: If the reset button is pressed within 15 seconds of the initial alarm, the CO detector
will not transmit the alarm signal to the iControl box.
You can have a notification sent to you when the alarm triggers. For details on how to
add a notification, see Notifications
.
See Frequently Asked Questions for important details on your Carbon Monoxide
detector.
Your Door/Window Sensor