User's Manual

Printed Documentation
4. Choose the device type (‘Door/Window Sensor – Micro— Model 60-688-
95’, ‘Door/Window Sensor – Model 60-670-95R’, or ‘Door/Window Sensor
– Recessed— Model 60-741-95’).
5. Create a name for the device such as ‘Front Door Sensor’.
6. Enter the six-digit ID number of the device (e.g., ‘69FAA6’). The ID is
found on the back of the Door/Window sensor. It is a combination of six
letters and numbers, preceded by the letters ‘DL’. (You can enter the
letters in lower- or upper-case.) Do not enter the letters ‘DL’ or use the
letters and number next to the letters ‘TX’.
7. Click on the ‘Add’ button. You will be returned to the System window and
your newly-added sensor will appear in the list of devices.
Checking Installation of Your Door/Window Sensor
After mounting your Door/Window sensor, go back to your computer, click on the
System tab, and check to see if a green dot appears next to the name of the Door/Window
sensor.
Once the sensor is added to your System and mounted, the iControl box will discover it