User's Manual

Managing Your iControl Devices
the Lamp module in the kit. If you purchase additional Lamp modules or Keychain
Remotes, you will need to add an automation to enable the Keychain Remote to turn on
or off existing or newly-purchased Lamp modules.
To control the Lamp module from your personal web portal:
1. Click on the ‘QuikControl’ button in the blue menu bar.
2. From the QuikControl drop-down menu, select the appropriate Lamp
module.
3. In the ‘Set Brightness Level’ drop-down menu, select the desired
brightness (e.g., 50%).
4. Click on the ‘Set’ button to save the change. The new light level will take
effect in a few seconds, after the iControl System has received the
requested change.
To learn how to control the Lamp module via a schedule, see Schedules
. To learn how to
control the Lamp module via an automation, see Automations
.
To check the status of your Lamp module:
x Click on the Summary tab.
x In the Current States area of your Status window, scroll down the list to
locate your Lamp module. You will see the brightness level of the Lamp
module to the right of its name. Note that you can adjust this level by
clicking on it.