User's Manual

Installation Guide for the iHub-3000B-ADT, iHub-3001B-ADT

Note: Depending on how the system is configured, this screen might not require you

to enter all of the information shown in this example.

To configure the site information:

1. Enter the required information from your Installer Reference Sheet, and then click Next.

Note: The Security Panel User Access Code must match the same access code in the

ADT Pulse portal. For example if the user access code is 1234 (not recommended), the ADT

Pulse setting must also be 1234 or remote control will not be possible.

The installer should inform the customer that if they ever change their keypad user code

they must also change the code in the ADT Pulse web portal.

A message informs you that the service is now active.

Note: If the service is not successfully activated, please refer to the Pulse

Troubleshooting guide for help.

2. Click Go to Portal.

The installer sign in page appears.