Network Card User's Manual

Description This example is for a single channel. The Digital

output Module in slot 3 and channel 10 (0Ah) of the

I-8000 unit at address 01h will be set to OFF. This

example is only for output modules where the channel

number is less than or equal to 16.

The table below show to use command #AASiBjs to set 16-channel digital output module of

the specified channel and slot of the I-8000 unit.

Command Channel Status Command Channel Status

#01S31000 Set the Channel 0 DO OFF #01S31001 Set the Channel 0 DO ON

#01S31100 Set the Channel 1 DO OFF #01S31101 Set the Channel 1 DO ON

#01S31200 Set the Channel 2 DO OFF #01S31201 Set the Channel 2 DO ON

#01S31300 Set the Channel 3 DO OFF #01S31301 Set the Channel 3 DO ON

#01S31400 Set the Channel 4 DO OFF #01S31401 Set the Channel 4 DO ON

#01S31500 Set the Channel 5 DO OFF #01S31501 Set the Channel 5 DO ON

#01S31600 Set the Channel 6 DO OFF #01S31601 Set the Channel 6 DO ON

#01S31700 Set the Channel 7 DO OFF #01S31701 Set the Channel 7 DO ON

#01S31800 Set the Channel 8 DO OFF #01S31801 Set the Channel 8 DO ON

#01S31900 Set the Channel 9 DO OFF #01S31901 Set the Channel 9 DO ON

#01S31A00 Set the Channel 10 DO OFF #01S31A01 Set the Channel 10 DO ON

#01S31B00 Set the Channel 11 DO OFF #01S31B01 Set the Channel 11 DO ON

#01S31C00 Set the Channel 12 DO OFF #01S31C01 Set the Channel 12 DO ON

#01S31D00 Set the Channel 13 DO OFF #01S31D01 Set the Channel 13 DO ON

#01S31E00 Set the Channel 14 DO OFF #01S31E01 Set the Channel 14 DO ON

#01S31F00 Set the Channel 15 DO OFF #01S31F01 Set the Channel 15 DO ON

8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 79