Owners manual

TPD/VPD Series HMI Device User Manual

 Follow the procedure described below:

Step 1: Attach a power supply to the TouchPAD device. Refer to Section 3.3 “Supply Power to the

TouchPAD” for more details.

Step 2: Connect the TouchPAD device to the Host PC using an I-7520 module (Option).

Step 3: Use a flat-head screwdriver to set the Rotary Switch on the TouchPAD device to “Update

Only” mode (position 1). Reboot the TouchPAD device and then setting is complete. Note that the

default configuration is “Run Only” mode (position 0).