User's Manual

Product #:ZB-UPS01
Confidential Page 4/14
Doc. #: ZB-UPS01 Reference Note <Rev. 0.9>
2. POWER SAVING MODES
The ZB-UPS01 includes several low power operating modes to permit the most efficient use of the
available power. Below are descriptions of the available selections.
ACTIVE: In Active Mode, all ZB-UPS01 circuits are powered and available for immediate action.
This includes the RF receiver which actively monitors the air for an incoming communications
request. Two sub-modes are classified as TX-ACTIVE and RX-ACTIVE. The current
consumption of TX-ACTIVE is 44 mA while RX-ACTIVE is 38 mA.