Quick Start Guide

1A. OVERVIEW
This series network camera integrates the traditional camera and
network video technology. It adopts video data collection and
transmission together. It can connect to the network directly
without any auxiliary device.
This series network camera uses standard H.264 and H.265 video
compression technology, which maximizes the video storage and
quality. It powers with either 12VDC or PoE.
The camera supports the IR night vision function. In the night
environments, the device can use the IR light to highlight the
object which is suitable for the surveillance function in the low
illumination environments. The waterproof design conforms to the
IP67 level. It has the sound waterproof function suitable for use in
the outdoor environments.
It can be used standalone or with a network video recorder. If used
standalone, it is able to utilize IC Realtime’s software suite
including Smart ICRSS, IC View and ICRSS Pro. This model also
supports IC Realtime’s P2P connection which allows easy remote
connection.
1B. Camera Interface
1. Zoom: Adjust lens to wide angle (zoom out)
2. Reset Button. See section 2B for reset instructions
3. Telephoto button: Increases focal length (zoom in the image).
4. SD Card port: Input SD Card storage here.
5. Video port: BNC test output (on some models)
6. Serial port. May be for Alarm or Audio I/O depending on
camera model.
7. Power input port. Ensure you are using the proper
recommended power requirements for this camera.
8. Network port: Connects to network, supports PoE.
Note: Your model may vary in appearance.
MARGIN
GUIDES
To see the guides to go:
View / Guides / Show
Guides
2 | www.icrealtime.com