Quick Start Guide

2C. RESTORE FACTORY DEFAULTS AND SD CARD INSTALLATION

Important: Make sure the device is powered when attempting to press

RESET button.

Step 1 Please refer Figure 2-1 to loosen the dome body.

Step 2 Take the dome body out and then open cover to access reset

and SD card slot. Skip to step 3 if only installing SD card. Slightly

press the RESET button for 15-30 seconds to complete the factory

reset. The camera will reboot. See Figure 2-2.

MARGIN

GUIDES

Stay within the yellow

box. Do not let text go

beyond, instead move

to the next column or

start a new page.

5 | www.icrealtime.com

Figure 2-1

Step 3 Install the SD card as shown in Figure 2-2. Re- install the

dome cover.

Step 4 Reassemble the dome body to cover.

3A. OVERVIEW

The IP Conﬁg tool is used to search the local network for IC Realtime

devices as well as modify the IP addresses and upgrading ﬁrmware.

This software can be downloaded at:

https://icrealtime.com/downloads under Desktop Utility Apps

3B. OPERATION

Double click the “ConﬁgTools.exe” icon to run. The interface will be

displayed as shown in Figure 3-1. Click on the blue circle icon with

the two arrows to refresh and scan the network.

Figure 3-1

Figure 2-2