G-501 Product Information Guide
Compatible Mobile Phones The following model types of mobile phone can be charged by the base via the USB connector: HTC: HD2/ Incredible S/ Desire S etc. MIONE: M1/M2 Moto: Mb860 etc. Lenovo: LePhone etc. Note: Please do not charge the Galaxy and other mobile phone at the same time. This guide contains helpful information that enables you to enjoy all of the features of your BT handset.
Introduction Thank you for purchasing the Bluetooth handset. The new product offers you a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering wireless connections with Galaxy. Please read this guide before use and kindly note that the contents in this guide may be updated without notice. Technical Specifications Bluetooth Compliance Bluetooth Specifications version 3.0 Frequency Band 2.
Care and Maintenance Do not attempt to open the BT handset, only the authorized maintenance staff should perform the service. Please check with your local dealer. Do not expose the handset to liquid, moisture or humidity. It is not waterproof. Do not expose the handset to dusty and dirty environment. Do not expose the handset to fire. It may result in explosion. Do not expose or store the handset in high heat.
Contents Chapter 1: Getting Started 6 Feature List 7 Package Contents 8 Bluetooth Handset Overview 9 Connecting 10 Charging 11 Turning On or Off the Handset Symptom Solution Disable Bluetooth in the Galaxy and then enable it again, the disconnected Bluetooth connection between the handset and the Galaxy cannot be automatically resumed. Due to differences in each Galaxy's software, so it is normal for some Galaxy that the Bluetooth connection cannot be automatically resumed.
Chapter 5: Additional Information Troubleshooting Symptom The handset doesn't turn on. The handset is unable to use with the Galaxy. Solution Ensure the battery is properly charged, fully drained battery may take a while to charge up. once the device crush down, press the reset button which bulid in the reset hole to restart. Contact an authorized service center. Ensure the handset and the Galaxy is turned on. Ensure the Bluetooth feature on the Galaxy is activated.
Chapter 1: Getting Started Flash LED Features List When a new call comes in, the LED on the keypad will flash if this feature is enabled. 1. Phonebook synchronization from the Galaxy 2. Phonebook searching 3. Charge for some other mobile phones by the USB output port on the base is available 4. Voice dialing / S Voice 5. Call waiting 6. Handsfree conversation 7. Music playing control 8. 3.5mm headset jack for music playing (A2DP) 9. Call logs 10. Profiles setting (Normal\Silence) 11.
Device Name Package Contents 1 Press Once you have unpacked your Bluetooth handset, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. beneath Menu. or 2 Press beneath Select. to move to 4Setting, then press or to move to 5DeviceName, then press 3 Press beneath Select. 4 Enter the name, up to 12 characters long that you want to assign to the handset, then press beneath Select. Handset Base with Galaxy charger Power supply (5V, 1.
Bluetooth Handset Overview Avoid Loss Handset After this function is enabled, once your Galaxy and G-501 are keep away from the Bluetooth's effective range, G-501 will ring continuous even in silence mode. 1 1 Press 9 8 7 11 6 15 1. Charging LED 2. LCD screen 3. Up key 4. Music control key 5. Reject/Power key 6. Numeric keypad 7. Down key 8 10 2 3 4 5 beneath Menu. or 2 Press beneath Select. 14 to move to 4Setting, then press or to move to 3AvoidLoss, then press 3 Press beneath Select.
Setting Base Back Light You can adjust the backlight time of the handset keypad. Then after the setting time, when no key is pressed, the backlight of the handset keypad will be off. 1 Press Knobs to move to 4Setting, then press beneath Select to choose 1BackLight. or 4 Press then press to choose among 5s, 15s and 25s, beneath Select. Key Lock After the time you set, and no key is pressed, the keypad will be locked automatically. To unlock, press and hold . 1 Press beneath Menu.
Charging Ring Volume BT Handset & Galaxy 1 Press The BT handset comes with a builtin rechargeable Li-Polymer battery. Before initial operation, fully charge the BT handset for 5 hours or more. or 2 Press beneath Select. To charge the Bluetooth handset or Galaxy, simply place it on the base. beneath Menu. to move to 3Profile, then press or to move to 3RingVol, then press 3 Press beneath Select. or to select the ring volume, then press 4 Press beneath Select.
Other Mobile Phones Profile In Call You can set your handset to ring or just be silent when a new call comes in. Also, you can switch the two modes in the standby mode by pressing and holding . 1 Press beneath Menu. or 2 Press beneath Select. to move to 3Profile, then press 3 Press beneath Select to choose 1InCall. 4 Press press or to choose 1Ring or 2Silent, then beneath Select.
Chapter 2: Bluetooth Settings Pairing with a Galaxy To use a Galaxy with your Bluetooth handset, you must first pair and connect the Galaxy with the handset. 1 Make sure the handset is power off before starting the pairing process, and place the Bluetooth handset within 1 meter away from your Galaxy. button, Settings, Wireless and 2 On the Galaxy, click network, Bluetooth settings, then click Bluetooth. When to the left side of Bluetooth appears as green color, the Bluetooth on the Galaxy is turned on.
Call Logs Notes: Received or Missed Calls The last 10 received (or missed) calls are stored in the call logs. 1 Press beneath Menu. 2 Press Select. to move to 2Caller, then press beneath Connecting a Galaxy beneath Select to access 1Received or 3 Press press to choose 2Missed, then press beneath Select. The list of incoming calls appears. 4 Scroll through the relevant calls list using until you find the desired number, press out.
Note: Once the handset and the Galaxy is more than 10 meters apart, they will be disconnected automatically. If you move the handset closer to Galaxy within 10 minutes, they can be re-connected. Otherwise, the handset will be turned off automatically. Disconnecting a Galaxy When not using the handset with the Galaxy, they can be disconnected as follows: Review or Dial a Number in Phonebook 1 Press beneath Menu. 2 Press beneath Select to choose 1Phonebook. 3 Press beneath Select to choose 1Search.
Phonebook Chapter 3: Basic Functions Download Phonebook from the Galaxy Making a Call The phonebook on your Galaxy can be downloaded to your Bluetooth handset. Each downloaded phonebook entry can store up to 500 entries. You can access these phonebook entries and use them to make a call. During the phonebook reviewing, if a number is more than 12 digits, press to review the other digits. 1 Enter a telephone number. Check it.
Call Switching between the Handset and a Galaxy During a call, you can switch between your BT handset and your Galaxy. Menu Structure 1Phonebook Method 1: Using the Galaxy 1 During a cell line call using the Bluetooth handset, click (the bar below Bluetooth is green) on the display of the Galaxy. The call switches to the Galaxy. 3Clear 4Opp 2Caller (the bar below Bluetooth 2 To switch back, click is gray) on the Galaxy. The call switches back to the Bluetooth handset.
Chapter 4: Menu Settings Receiving a Call Menu Navigation To answer a call, after the handset rings, press . You can also use the Galaxy to answer the call. or To access a menu option: Rejecting a Call 1 When no Galaxy is connected, press to enter the menu, otherwise press beneath Menu to enter. To reject an incoming call, after the handset rings, press . 2 To scroll through menu options, press repeatedly. 3 To select a menu, press moving to the desired menu.
Music Control After connecting to the Galaxy, press to play the music. During music playing, press to play previous song and press to play next song (If a song is played by Galaxy, it will also be played through G-501, but you should press to enter the playing interface.
Music Control After connecting to the Galaxy, press to play the music. During music playing, press to play previous song and press to play next song (If a song is played by Galaxy, it will also be played through G-501, but you should press to enter the playing interface.
Chapter 4: Menu Settings Receiving a Call Menu Navigation To answer a call, after the handset rings, press . You can also use the Galaxy to answer the call. or To access a menu option: Rejecting a Call 1 When no Galaxy is connected, press to enter the menu, otherwise press beneath Menu to enter. To reject an incoming call, after the handset rings, press . 2 To scroll through menu options, press repeatedly. 3 To select a menu, press moving to the desired menu.
Call Switching between the Handset and a Galaxy During a call, you can switch between your BT handset and your Galaxy. Menu Structure 1Phonebook Method 1: Using the Galaxy 1 During a cell line call using the Bluetooth handset, click (the bar below Bluetooth is green) on the display of the Galaxy. The call switches to the Galaxy. 3Clear 4Opp 2Caller (the bar below Bluetooth 2 To switch back, click is gray) on the Galaxy. The call switches back to the Bluetooth handset.
Phonebook Chapter 3: Basic Functions Download Phonebook from the Galaxy Making a Call The phonebook on your Galaxy can be downloaded to your Bluetooth handset. Each downloaded phonebook entry can store up to 500 entries. You can access these phonebook entries and use them to make a call. During the phonebook reviewing, if a number is more than 12 digits, press to review the other digits. 1 Enter a telephone number. Check it.
Note: Once the handset and the Galaxy is more than 10 meters apart, they will be disconnected automatically. If you move the handset closer to Galaxy within 10 minutes, they can be re-connected. Otherwise, the handset will be turned off automatically. Disconnecting a Galaxy When not using the handset with the Galaxy, they can be disconnected as follows: Review or Dial a Number in Phonebook 1 Press beneath Menu. 2 Press beneath Select to choose 1Phonebook. 3 Press beneath Select to choose 1Search.
Call Logs Notes: Received or Missed Calls The last 10 received (or missed) calls are stored in the call logs. 1 Press beneath Menu. 2 Press Select. to move to 2Caller, then press beneath Connecting a Galaxy beneath Select to access 1Received or 3 Press press to choose 2Missed, then press beneath Select. The list of incoming calls appears. 4 Scroll through the relevant calls list using until you find the desired number, press out.
Chapter 2: Bluetooth Settings Pairing with a Galaxy To use a Galaxy with your Bluetooth handset, you must first pair and connect the Galaxy with the handset. 1 Make sure the handset is power off before starting the pairing process, and place the Bluetooth handset within 1 meter away from your Galaxy. button, Settings, Wireless and 2 On the Galaxy, click network, Bluetooth settings, then click Bluetooth. When to the left side of Bluetooth appears as green color, the Bluetooth on the Galaxy is turned on.
Other Mobile Phones Profile In Call You can set your handset to ring or just be silent when a new call comes in. Also, you can switch the two modes in the standby mode by pressing and holding . 1 Press beneath Menu. or 2 Press beneath Select. to move to 3Profile, then press 3 Press beneath Select to choose 1InCall. 4 Press press or to choose 1Ring or 2Silent, then beneath Select.
Charging Ring Volume BT Handset & Galaxy 1 Press The BT handset comes with a builtin rechargeable Li-Polymer battery. Before initial operation, fully charge the BT handset for 5 hours or more. or 2 Press beneath Select. To charge the Bluetooth handset or Galaxy, simply place it on the base. beneath Menu. to move to 3Profile, then press or to move to 3RingVol, then press 3 Press beneath Select. or to select the ring volume, then press 4 Press beneath Select.
Setting Base Back Light You can adjust the backlight time of the handset keypad. Then after the setting time, when no key is pressed, the backlight of the handset keypad will be off. 1 Press Knobs to move to 4Setting, then press beneath Select to choose 1BackLight. or 4 Press then press to choose among 5s, 15s and 25s, beneath Select. Key Lock After the time you set, and no key is pressed, the keypad will be locked automatically. To unlock, press and hold . 1 Press beneath Menu.
Bluetooth Handset Overview Avoid Loss Handset After this function is enabled, once your Galaxy and G-501 are keep away from the Bluetooth's effective range, G-501 will ring continuous even in silence mode. 1 1 Press 9 8 7 11 6 15 1. Charging LED 2. LCD screen 3. Up key 4. Music control key 5. Reject/Power key 6. Numeric keypad 7. Down key 8 10 2 3 4 5 beneath Menu. or 2 Press beneath Select. 14 to move to 4Setting, then press or to move to 3AvoidLoss, then press 3 Press beneath Select.
Device Name Package Contents 1 Press Once you have unpacked your Bluetooth handset, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. beneath Menu. or 2 Press beneath Select. to move to 4Setting, then press or to move to 5DeviceName, then press 3 Press beneath Select. 4 Enter the name, up to 12 characters long that you want to assign to the handset, then press beneath Select. Handset Base with Galaxy charger Power supply (5V, 1.
Chapter 1: Getting Started Flash LED Features List When a new call comes in, the LED on the keypad will flash if this feature is enabled. 1. Phonebook synchronization from the Galaxy 2. Phonebook searching 3. Charge for some other mobile phones by the USB output port on the base is available 4. Voice dialing / S Voice 5. Call waiting 6. Handsfree conversation 7. Music playing control 8. 3.5mm headset jack for music playing (A2DP) 9. Call logs 10. Profiles setting (Normal\Silence) 11.
Chapter 5: Additional Information Troubleshooting Symptom The handset doesn't turn on. The handset is unable to use with the Galaxy. Solution Ensure the battery is properly charged, fully drained battery may take a while to charge up. once the device crush down, press the reset button which bulid in the reset hole to restart. Contact an authorized service center. Ensure the handset and the Galaxy is turned on. Ensure the Bluetooth feature on the Galaxy is activated.
Contents Chapter 1: Getting Started 6 Feature List 7 Package Contents 8 Bluetooth Handset Overview 9 Connecting 10 Charging 11 Turning On or Off the Handset Symptom Solution Disable Bluetooth in the Galaxy and then enable it again, the disconnected Bluetooth connection between the handset and the Galaxy cannot be automatically resumed. Due to differences in each Galaxy's software, so it is normal for some Galaxy that the Bluetooth connection cannot be automatically resumed.
Care and Maintenance Do not attempt to open the BT handset, only the authorized maintenance staff should perform the service. Please check with your local dealer. Do not expose the handset to liquid, moisture or humidity. It is not waterproof. Do not expose the handset to dusty and dirty environment. Do not expose the handset to fire. It may result in explosion. Do not expose or store the handset in high heat.
Introduction Thank you for purchasing the Bluetooth handset. The new product offers you a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering wireless connections with Galaxy. Please read this guide before use and kindly note that the contents in this guide may be updated without notice. Technical Specifications Bluetooth Compliance Bluetooth Specifications version 3.0 Frequency Band 2.
Compatible Mobile Phones The following model types of mobile phone can be charged by the base via the USB connector: HTC: HD2/ Incredible S/ Desire S etc. MIONE: M1/M2 Moto: Mb860 etc. Lenovo: LePhone etc. Note: Please do not charge the Galaxy and other mobile phone at the same time. This guide contains helpful information that enables you to enjoy all of the features of your BT handset.
G-501 Product Information Guide
