i-400 Product Information Guide
Technical Specifications Bluetooth Compliance Bluetooth Specifications version 2.1 Frequency Band 2.4GHz ISM Spectrum; frequency hopping 79 channels Modulation GFSK (Gaussian Frequency Shift Keying) RF Power Class 2, -6-4dBm Operating Range Up to 10m (indoor) Connection Point-to-Point Security Security mode 3 (pairing, encryption, authentication) Power Supply Base input: 7.5V, 1.
Introduction Thank you for purchasing the BT handset. The new product offers you a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering wireless connections with iPhone. Please read this guide before use and kindly note that the contents in this guide may be updated without notice. The BT handset is Bluetooth V2.1 compliance. It is backward compatible with audio devices with V2.0 or earlier.
Symptom Disable Bluetooth in the iPhone and then enable it again, the disconnected Bluetooth connection between the handset and the iPhone cannot be automatically resumed. 18 Solution Due to differences in each iPhone's software, so it is normal for some iPhone that the Bluetooth connection cannot be automatically resumed. If in this case, please establish the Bluetooth connection manually (See P11 "Connecting an iPhone").
Contents Chapter 4: Additional Information Chapter 1: Getting Started Troubleshooting 6 Package Contents 7 BT Handset Overview 8 Connecting Symptom The handset doesn't turn on.
LED Indicator Chapter 4: Additional Information 17 Troubleshooting Red LED (Charging indicator) Handset Status 19 Care and Maintenance LED Status During the charging ON (steadily) Fully charged OFF 20 Technical Specifications 21 Compatible Mobile Phones Blue LED (Bluetooth indicator) Handset Status Power ON (unconnected) Standby (connected) LED Status Flashes at 1.5 seconds interval (0.5 seconds ON, 1 second OFF) Flashes at 3.5 seconds interval (0.
Chapter 1: Getting Started Adjusting the Volume Package Contents During a conversation, press + button to increase or press - button to decrease the volume. The handset volume will increase or decrease. Once you have unpacked your BT handset, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. Muting a Call During a conversation, you can temporarily mute the microphone so that the party on the other end of the line cannot hear you.
Method 2: Using the BT Handset BT Handset Overview During a call, press and hold + and - buttons for about 2 seconds to switch the call between the BT handset and the iPhone. Handset Earpiece Note: Volume controls To use this feature, the BT handset must be paired and connected to the iPhone beforehand. For more details, please refer to Bluetooth Settings section. Receiving a Call Multi-Function Button (MFB) Microphone To answer a call, after the handset rings, press MFB to accept the call.
Connecting Chapter 3: Operations Connect the plug of the power supply to the power jack of the base, and then plug the power supply into a standard AC wall outlet. Making a Call Using the iPhone Make calls on the iPhone in normal ways. Voice Dialing Your handset also support voice dialing with some iPhones. Before using this function, set up "voice-tags" on your iPhone. To AC wall outlet Charging Press MFB twice on the handset within 0.8 seconds. When a beep occurs, tell the desired number.
Disconnecting an iPhone Other Mobile Phones When not using the handset with the iPhone, they can be disconnected as follows: To charge some other mobile phones, plug the connector in the USB port on the base, then plug the other connector in the port of your mobile phone. For more information about the compatible model, please see page 21. Method 1: Power off the handset. After that, Not Connected appears to the right side of i-400 on the iPhone screen.
Chapter 2: Bluetooth Settings Connecting an iPhone Pairing with an iPhone Although two iPhones can be paired with the BT handset, only one iPhone can be connected to the base and be engaged in a call at one time. To use an iPhone with your Bluetooth handset, you must first pair and connect the iPhone with the handset. 1 Make sure the handset is power off before starting the pairing process, and place the Bluetooth handset within 1 meter away from your iPhone.
Chapter 2: Bluetooth Settings Connecting an iPhone Pairing with an iPhone Although two iPhones can be paired with the BT handset, only one iPhone can be connected to the base and be engaged in a call at one time. To use an iPhone with your Bluetooth handset, you must first pair and connect the iPhone with the handset. 1 Make sure the handset is power off before starting the pairing process, and place the Bluetooth handset within 1 meter away from your iPhone.
Disconnecting an iPhone Other Mobile Phones When not using the handset with the iPhone, they can be disconnected as follows: To charge some other mobile phones, plug the connector in the USB port on the base, then plug the other connector in the port of your mobile phone. For more information about the compatible model, please see page 21. Method 1: Power off the handset. After that, Not Connected appears to the right side of i-400 on the iPhone screen.
Connecting Chapter 3: Operations Connect the plug of the power supply to the power jack of the base, and then plug the power supply into a standard AC wall outlet. Making a Call Using the iPhone Make calls on the iPhone in normal ways. Voice Dialing Your handset also support voice dialing with some iPhones. Before using this function, set up "voice-tags" on your iPhone. To AC wall outlet Charging Press MFB twice on the handset within 0.8 seconds. When a beep occurs, tell the desired number.
Method 2: Using the BT Handset BT Handset Overview During a call, press and hold + and - buttons for about 2 seconds to switch the call between the BT handset and the iPhone. Handset Earpiece Note: Volume controls To use this feature, the BT handset must be paired and connected to the iPhone beforehand. For more details, please refer to Bluetooth Settings section. Receiving a Call Multi-Function Button (MFB) Microphone To answer a call, after the handset rings, press MFB to accept the call.
Chapter 1: Getting Started Adjusting the Volume Package Contents During a conversation, press + button to increase or press - button to decrease the volume. The handset volume will increase or decrease. Once you have unpacked your BT handset, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. Muting a Call During a conversation, you can temporarily mute the microphone so that the party on the other end of the line cannot hear you.
LED Indicator Chapter 4: Additional Information 17 Troubleshooting Red LED (Charging indicator) Handset Status 19 Care and Maintenance LED Status During the charging ON (steadily) Fully charged OFF 20 Technical Specifications 21 Compatible Mobile Phones Blue LED (Bluetooth indicator) Handset Status Power ON (unconnected) Standby (connected) LED Status Flashes at 1.5 seconds interval (0.5 seconds ON, 1 second OFF) Flashes at 3.5 seconds interval (0.
Contents Chapter 4: Additional Information Chapter 1: Getting Started Troubleshooting 6 Package Contents 7 BT Handset Overview 8 Connecting Symptom The handset doesn't turn on.
Symptom Disable Bluetooth in the iPhone and then enable it again, the disconnected Bluetooth connection between the handset and the iPhone cannot be automatically resumed. 18 Solution Due to differences in each iPhone's software, so it is normal for some iPhone that the Bluetooth connection cannot be automatically resumed. If in this case, please establish the Bluetooth connection manually (See P11 "Connecting an iPhone").
Introduction Thank you for purchasing the BT handset. The new product offers you a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering wireless connections with iPhone. Please read this guide before use and kindly note that the contents in this guide may be updated without notice. The BT handset is Bluetooth V2.1 compliance. It is backward compatible with audio devices with V2.0 or earlier.
Technical Specifications Bluetooth Compliance Bluetooth Specifications version 2.1 Frequency Band 2.4GHz ISM Spectrum; frequency hopping 79 channels Modulation GFSK (Gaussian Frequency Shift Keying) RF Power Class 2, -6-4dBm Operating Range Up to 10m (indoor) Connection Point-to-Point Security Security mode 3 (pairing, encryption, authentication) Power Supply Base input: 7.5V, 1.
Compatible Mobile Phones The following model types of mobile phone can be charged by the base via the USB connector: HTC: HD2/ Incredible S/ Desire S Samsung: Galaxy S/ Galaxy SⅡ Moto: MB860 Lenovo: LePhone TCL: A919 Note: Please do not charge the iPhone and other mobile phone at the same time.
i-400 Product Information Guide
