i-900 Product Information Guide
This guide contains helpful information that enables you to enjoy all of the features of your phone.
Introduction Thank you for purchasing the Bluetooth phone. Your new phone can connect to an iPhone with Bluetooth function, which enables you to make calls through cell phone lines and landline. Enjoy these additional features, as well: Large displays and accessible menus. iPhone charger - Charge an iPhone using a port on your new phone. Contacts list - Your personal phonebook of up to 100 listings, arranged alphabetically.
Warnings Your Bluetooth phone has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, however, there are a few basic precautions that you should take to avoid hurting yourself or damaging the unit: ! Read the instructions in this information guide carefully. Be sure to save it for future reference. ! Read and follow all warning and instruction labels on the equipment itself.
Chapter 8: Additional Information Chapter 1: Getting Started Troubleshooting Symptom The phone doesn't works. Contents Solution 7 Features List 9 Phone Layout Check the connection of the switching power supply. 11 Key Functions The phone works, but no dial tone is heard. Check the connection of the phone line cord. 14 Connecting Disable Bluetooth in the iPhone and then enable it again, the disconnected Bluetooth connection between the base and the iPhone cannot be automatically resumed.
Chapter 4: Set Phone Chapter 7: Menu Structure 29 Ring Setting 31 LCD Contrast Set Phone 32 Hour Format Sound LCD Contrast 32 Date Format 33 Flash Time Set Time&Date 33 Language Dial Mode 34 Call Waiting Set Flash 34 Area & Long distance Code Language 35 Pause Time Call Waiting Chapter 5: Call Logs Set AREA&LDS 36 Incoming Calls Pause Time 38 Dialed Calls List Chapter 6: Contacts Call Logs Missed Calls 39 Storing Contact Entries Answered Calls 40 Character Map Dialed Calls 41 Rev
Download Phonebook from the iPhone Chapter 1: Getting Started Up to 2 cell phonebooks can be downloaded to your Bluetooth phone via Bluetooth wireless technology. Each downloaded phonebook can store up to 400 entries. You can access any phonebook entry and use it to make a call on the landline or either of two iPhones. Features List 1 Make sure that the iPhone is already connected to the Bluetooth phone with Bluetooth, and place your iPhone next to the telephone base during the downloading.
Landline FSK/DTMF Caller ID Incoming call indicator Private/Out of area notification Message waiting notification Selectable dialing mode Selectable Flash time Reviewing or Dialing a Number in Contacts 1 Press beneath Menu to display the main menu items. or 2 Press beneath Select. to choose Contacts, then press 3 Press beneath Select to choose Home. 4 Press beneath Select to access Review. 5 Repeatedly press or to scroll to the desired entry.
Method 2: In Standby Mode 1 Enter a phone number, then press Phone Layout beneath Save. 2 Complete storage by starting from Step 5 in the last paragraph of Method 1. 2 3 4 NEW 1 2 Character Map To enter a specific alphanumeric character, press the relevant key according to the following table: once for the first character, twice for the second and so on. 5 6 20 19 7 8 18 R Key 0 1 2 3 4 5 6 7 8 9 Characters in the displayed order _ ' % @ 13 17 1. Handset 2. Hook switch 3. LCD display 4.
Chapter 6: Contacts You can store frequently used numbers so that you can easily make a call without having to remember or enter the phone number. You can store up 100 entries in your contact list. Storing Contact Entries USB jack Telephone Micro USB jack Power jack line jack Method 1: Using the Contacts Menu 1 Press beneath Menu to display the main menu items. or 2 Press beneath Select. to choose Contacts, then press 3 Press beneath Select to choose Home. 4 Press Select.
Dialed Calls List Key Functions The last 20 dialed calls are stored in the Dialed Calls list. You can review, redial, delete and save these numbers. 1 Press beneath Menu to display the main menu items. 2 Press or beneath Select. Soft keys: Press to perform the function listed above the key. to choose Call Logs, then press or to choose Dialed Calls, then press 3 Press beneath Select. The last dialed number appears on the screen.
Select Keys Notes: Press the left or right shown above it, on the display. button to initiate the function Menu Left: Contacts Select Right: Back Exit Save Clear Option At step 3, if the list is empty, "Empty" appears. When you missed one or more calls, "Missed Calls xx" appears. If the caller has specified that his name and number not be sent, "Private" appears on the screen and in the list.
Chapter 5: Call Logs Package Contents Incoming Calls Once you have unpacked your phone, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. When you receive a call and you subscribe to your network provider’s caller ID service, if the caller's information is transmitted from the network on which the call was made (and the caller doesn't hide it), the caller's phone number is displayed.
Connecting Pause Time 1 Connect the plug of the power supply to the power jack of the base, and then plug the power supply into a standard AC wall outlet. 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. 2 Connect one end of the phone line cord to the phone line jack on the base, and then connect the other end to a standard phone wall outlet. 3 Press or beneath Select.
Call Waiting Charging the iPhone 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. To charge the iPhone, simply insert it on the charging cradle. 3 Press or beneath Select. to choose Call Waiting, then press or to choose "On" to activate this feature or 4 Press beneath Select.
Choosing the Dialing Mode Flash Time Your phone can be set to pulse dialing (rotary), or tone dialing (DTMF). To change the dialing mode: During a conversation, allows you to access special services offered by your telephone network or to transfer a call to another extension if you are connected to a PABX (Private Automatic Branch of eXchange). 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. 3 Press or to choose Dial Mode, then press beneath Select.
Hour Format If you have set the time, you can choose the hour format. 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. 3 Press or to choose Set Time&Date, then press beneath Select. Notes: If you selected 12 Hour in the Hour Format menu, enter the time in 12h format and use or to select AM or PM. Press beneath Clear to correct if necessary.
Chapter 2: Bluetooth and Remote Control LCD Contrast Pairing with an iPhone This adjustment enables you to optimize the visibility of the display by changing the contrast level according to environmental conditions. To use an iPhone with your Bluetooth phone, you must first pair and connect the iPhone with the Bluetooth phone. 1 Turn on the Bluetooth feature of your iPhone. Touch Settings, General, Bluetooth and OFF, then the iPhone searches for available devices.
Cell Ring Tone Method 2: Using the Bluetooth Phone Menu You can set a unique Cell ring tone and adjust the ring volume. There are 10 ringtones, and 8 volume levels. 1 Press beneath Menu to display the main menu items. 1 Press beneath Menu to display the main menu items. or 2 Press beneath Select. 2 Press beneath Select to choose Set Phone. 3 Press 3 Press beneath Select to choose Sound. 4 Press beneath Select to choose Cell Ringtone.
Disconnecting an iPhone Chapter 4: Set Phone 1 Press Ring Setting beneath Menu to display the main menu items. or 2 Press beneath Select. 3 Press to choose Bluetooth, then press to choose Device List, press beneath Select. 4 The display shows all devices that have been paired before. Press or to choose the desired device, press beneath Select. 5 Press beneath Select to choose Disconnect. Then a prompt tone occurs and Not Connected appears to the right of i-900 on the iPhone screen.
Last Number Redial Removing a Paired iPhone Your phone allows you to quickly redial the last dialed number. If you already have the maximum of seven paired iPhones in the Device list and you want to add another iPhone, you must first delete a paired iPhone. Press and then press to dial the last-dialed number. 1 Press or 2 Press beneath Select. Flash Signal If your phone service includes call waiting or conference call services, you can use to initiate these functions.
Remote Control for Music Using the Speakerphone This feature allows you to control iPhone music playing via your Bluetooth connected phone. During a call, you can turn on the speakerphone to enjoy the comfort of a handsfree conversation. Use your iPhone to play music. To turn on the speakerphone, press replace the handset on the base. Press to play, press it again to pause. During the music playing, press and to adjust the volume, press and to select the desired track.
One-touch Memory Chapter 3: Basic Functions Storing a One-touch Number Making a Call Up to 4 numbers can be stored in one-touch buttons (M1~M4). You can place your calls in two ways: 1 Press and hold one of M1~M4. to insert a 2 Enter the number (up to 20 digits), press beneath Save. pause if necessary, then press beneath Save. For additional 3 Enter a name, then press details, please see the "Character Map". or 4 Press number, then press to select a ring to associate with the beneath Select.
Call Switching between the Bluetooth Phone and an iPhone Receiving a Call Method 1: Using the iPhone When a call is received, the phone rings and "Incoming Call" appears on the screen. "N" indicates a landline call or "C" indicates a cellphone line one. If the incoming call can be identified (i.e. The caller's information is transmitted) you also see the caller's number. During a call, you can switch between your Bluetooth phone and your iPhone.
Call Switching between the Bluetooth Phone and an iPhone Receiving a Call Method 1: Using the iPhone When a call is received, the phone rings and "Incoming Call" appears on the screen. "N" indicates a landline call or "C" indicates a cellphone line one. If the incoming call can be identified (i.e. The caller's information is transmitted) you also see the caller's number. During a call, you can switch between your Bluetooth phone and your iPhone.
One-touch Memory Chapter 3: Basic Functions Storing a One-touch Number Making a Call Up to 4 numbers can be stored in one-touch buttons (M1~M4). You can place your calls in two ways: 1 Press and hold one of M1~M4. to insert a 2 Enter the number (up to 20 digits), press beneath Save. pause if necessary, then press beneath Save. For additional 3 Enter a name, then press details, please see the "Character Map". or 4 Press number, then press to select a ring to associate with the beneath Select.
Remote Control for Music Using the Speakerphone This feature allows you to control iPhone music playing via your Bluetooth connected phone. During a call, you can turn on the speakerphone to enjoy the comfort of a handsfree conversation. Use your iPhone to play music. To turn on the speakerphone, press replace the handset on the base. Press to play, press it again to pause. During the music playing, press and to adjust the volume, press and to select the desired track.
Last Number Redial Removing a Paired iPhone Your phone allows you to quickly redial the last dialed number. If you already have the maximum of seven paired iPhones in the Device list and you want to add another iPhone, you must first delete a paired iPhone. Press and then press to dial the last-dialed number. 1 Press or 2 Press beneath Select. Flash Signal If your phone service includes call waiting or conference call services, you can use to initiate these functions.
Disconnecting an iPhone Chapter 4: Set Phone 1 Press Ring Setting beneath Menu to display the main menu items. or 2 Press beneath Select. 3 Press to choose Bluetooth, then press to choose Device List, press beneath Select. 4 The display shows all devices that have been paired before. Press or to choose the desired device, press beneath Select. 5 Press beneath Select to choose Disconnect. Then a prompt tone occurs and Not Connected appears to the right of i-900 on the iPhone screen.
Cell Ring Tone Method 2: Using the Bluetooth Phone Menu You can set a unique Cell ring tone and adjust the ring volume. There are 10 ringtones, and 8 volume levels. 1 Press beneath Menu to display the main menu items. 1 Press beneath Menu to display the main menu items. or 2 Press beneath Select. 2 Press beneath Select to choose Set Phone. 3 Press 3 Press beneath Select to choose Sound. 4 Press beneath Select to choose Cell Ringtone.
Chapter 2: Bluetooth and Remote Control LCD Contrast Pairing with an iPhone This adjustment enables you to optimize the visibility of the display by changing the contrast level according to environmental conditions. To use an iPhone with your Bluetooth phone, you must first pair and connect the iPhone with the Bluetooth phone. 1 Turn on the Bluetooth feature of your iPhone. Touch Settings, General, Bluetooth and OFF, then the iPhone searches for available devices.
Hour Format If you have set the time, you can choose the hour format. 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. 3 Press or to choose Set Time&Date, then press beneath Select. Notes: If you selected 12 Hour in the Hour Format menu, enter the time in 12h format and use or to select AM or PM. Press beneath Clear to correct if necessary.
Choosing the Dialing Mode Flash Time Your phone can be set to pulse dialing (rotary), or tone dialing (DTMF). To change the dialing mode: During a conversation, allows you to access special services offered by your telephone network or to transfer a call to another extension if you are connected to a PABX (Private Automatic Branch of eXchange). 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. 3 Press or to choose Dial Mode, then press beneath Select.
Call Waiting Charging the iPhone 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. To charge the iPhone, simply insert it on the charging cradle. 3 Press or beneath Select. to choose Call Waiting, then press or to choose "On" to activate this feature or 4 Press beneath Select.
Connecting Pause Time 1 Connect the plug of the power supply to the power jack of the base, and then plug the power supply into a standard AC wall outlet. 1 Press beneath Menu to display the main menu items. 2 Press beneath Select to choose Set Phone. 2 Connect one end of the phone line cord to the phone line jack on the base, and then connect the other end to a standard phone wall outlet. 3 Press or beneath Select.
Chapter 5: Call Logs Package Contents Incoming Calls Once you have unpacked your phone, make sure that you have all of these parts. If any component is missing or broken, please call your dealer. When you receive a call and you subscribe to your network provider’s caller ID service, if the caller's information is transmitted from the network on which the call was made (and the caller doesn't hide it), the caller's phone number is displayed.
Select Keys Notes: Press the left or right shown above it, on the display. button to initiate the function Menu Left: Contacts Select Right: Back Exit Save Clear Option At step 3, if the list is empty, "Empty" appears. When you missed one or more calls, "Missed Calls xx" appears. If the caller has specified that his name and number not be sent, "Private" appears on the screen and in the list.
Dialed Calls List Key Functions The last 20 dialed calls are stored in the Dialed Calls list. You can review, redial, delete and save these numbers. 1 Press beneath Menu to display the main menu items. 2 Press or beneath Select. Soft keys: Press to perform the function listed above the key. to choose Call Logs, then press or to choose Dialed Calls, then press 3 Press beneath Select. The last dialed number appears on the screen.
Chapter 6: Contacts You can store frequently used numbers so that you can easily make a call without having to remember or enter the phone number. You can store up 100 entries in your contact list. Storing Contact Entries USB jack Telephone Micro USB jack Power jack line jack Method 1: Using the Contacts Menu 1 Press beneath Menu to display the main menu items. or 2 Press beneath Select. to choose Contacts, then press 3 Press beneath Select to choose Home. 4 Press Select.
Method 2: In Standby Mode 1 Enter a phone number, then press Phone Layout beneath Save. 2 Complete storage by starting from Step 5 in the last paragraph of Method 1. 2 3 4 NEW 1 2 Character Map To enter a specific alphanumeric character, press the relevant key according to the following table: once for the first character, twice for the second and so on. 5 6 20 19 7 8 18 R Key 0 1 2 3 4 5 6 7 8 9 Characters in the displayed order _ ' % @ 13 17 1. Handset 2. Hook switch 3. LCD display 4.
Landline FSK/DTMF Caller ID Incoming call indicator Private/Out of area notification Message waiting notification Selectable dialing mode Selectable Flash time Reviewing or Dialing a Number in Contacts 1 Press beneath Menu to display the main menu items. or 2 Press beneath Select. to choose Contacts, then press 3 Press beneath Select to choose Home. 4 Press beneath Select to access Review. 5 Repeatedly press or to scroll to the desired entry.
Download Phonebook from the iPhone Chapter 1: Getting Started Up to 2 cell phonebooks can be downloaded to your Bluetooth phone via Bluetooth wireless technology. Each downloaded phonebook can store up to 400 entries. You can access any phonebook entry and use it to make a call on the landline or either of two iPhones. Features List 1 Make sure that the iPhone is already connected to the Bluetooth phone with Bluetooth, and place your iPhone next to the telephone base during the downloading.
Chapter 4: Set Phone Chapter 7: Menu Structure 29 Ring Setting 31 LCD Contrast Set Phone 32 Hour Format Sound LCD Contrast 32 Date Format 33 Flash Time Set Time&Date 33 Language Dial Mode 34 Call Waiting Set Flash 34 Area & Long distance Code Language 35 Pause Time Call Waiting Chapter 5: Call Logs Set AREA&LDS 36 Incoming Calls Pause Time 38 Dialed Calls List Chapter 6: Contacts Call Logs Missed Calls 39 Storing Contact Entries Answered Calls 40 Character Map Dialed Calls 41 Rev
Chapter 8: Additional Information Chapter 1: Getting Started Troubleshooting Symptom The phone doesn't works. Contents Solution 7 Features List 9 Phone Layout Check the connection of the switching power supply. 11 Key Functions The phone works, but no dial tone is heard. Check the connection of the phone line cord. 14 Connecting Disable Bluetooth in the iPhone and then enable it again, the disconnected Bluetooth connection between the base and the iPhone cannot be automatically resumed.
Warnings Your Bluetooth phone has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, however, there are a few basic precautions that you should take to avoid hurting yourself or damaging the unit: ! Read the instructions in this information guide carefully. Be sure to save it for future reference. ! Read and follow all warning and instruction labels on the equipment itself.
i-900 Product Information Guide
