ICAR SERIES ICS-91 ICS-92 ICS-93 ICS-94 ICS-95 ICAR 100% MADE IN Printed by ICS
3.
4. Rear sight and front sight adjustments Switch to night front sight Adjust the high of front sight DOWN ICAR To switch by pulling up Windage correction UP Insert the sight adjustment tool in the front sight and turn it for adjustment. Take screwdriver to make the windage correction.
5. Bipod Disassemble bipod Fold bipod 1. Fold and align the bipod Unfold bipod 1. Fold and align the bipod ICAR 1. Release fix-stick to right position then pull stick 2. Then unfold the bipod into handguard 2. Then release the bipod 2. Unfold bipod 3. Release the bipod and get stuck into handguard 3. To the right position and let the bipod stand.
6. Gear box 1 2 ICAR Press the top receiver catch button 4 3 Remove the battery Remove the top receiver. 5 Remove the bolt handle Remove the magazine fire-select set. 6 grip Hop up Box Pull upper hop up than gearbox can draw out.
7. Folding stock 1 2 3 Push the butt catch and fold the butt ICAR Magazine attachment Handguard parts BB Load BBs Press the magazine release lever to load or unload the magazine. Pull up the handguard fixed lever. Push forward the handguard ring and then the lower handguard can be removed.
8. Hop Up Hop Up adjustment How to use a cleaning rod 25~30mm 10mm 1 Cut the cotton cloth length : approx 25~30mmWidth : approx:10mm and wind the cut cotton cloth charging set backward Adjustment procedure: 1.Pull the charging set backward and adjust the hop up 2.Backward Hop up , pellet will float up. 3.Forward Hop up , pellet will fall down. Use the cleaning rod to move the cotton forwards and backwards along the barrel to clean and remove any dirt build-up inside.
MG-12 9.
10.
