Manual IB-3810U3 External 10-Bay SINGLE System for 10x SATA 3.
Safety information IB-3810U3 Please read carefully the following information to prevent injuries, damage to material and device as well as data loss: Warning levels Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied with. DANGER Warns of a directly hazardous situation causing death or serious injury.
Safety information IB-3810U3 • Do not place objects on the device/power unit 4. Hazards caused by very small parts and packaging Risk of suffocation WARNING Risk of death by suffocation or swallowing • Keep small parts and accessories away from children • Store/dispose of plastic bags and packaging in an area that is inaccessible to children • Do not hand over small parts and packaging to children 5.
Sicherheitshinweise IB-3810U3 Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und Datenverlust beachten Sie bitte folgende Hinweise: Warnstufen Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen Hinweis auf Wahrscheinlichkeit, Art und Schwere der Folgen, wenn die Maßnahmen zur Vermeidung der Gefahr nicht befolgt werden. GEFAHR warnt vor einer unmittelbar gefährlichen Situation, die zum Tod oder zu schweren Verletzungen führen wird.
Sicherheitshinweise IB-3810U3 • direkte Sonneneinstrahlung auf Gerät/Netzteil vermeiden • ausreichend Umgebungsluft für Gerät/Netzteil sicherstellen • keine Gegenstände auf dem Gerät/Netzteil abstellen 4. Gefahren durch Kleinstteile und Verpackung WARNUNG Erstickungsgefahr Lebensgefahr durch Ersticken oder Verschlucken • Kleinteile, Zubehör für Kinder unzugänglich verwahren • Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen • Kleinteile und Verpackungen nicht in Kinderhände geben 5.
Manual IB-3810U3 Key features • External 10-bay SINGLE System for 10x 3.5" SATA I/II/III HDD • HDD capacity unlimited • Energy saving by supporting auto power off mode for HDDs and case fan • EASY-Swap, assembling by trayless and toolless design • Supported RAID level: SINGLE • External data interface: USB 3.0 with UASP Support • Transfer rates: USB 3.
Manual IB-3810U3 Drive installation Before the installation Note! Before installing the hard drive, please disconnect the power plug from the outlet. It may cause electric shock accident or malfunction. When connecting the hard drive, please note the electrostatic! Body’s static electricity may cause malfunction of the device. Please touch the metal objects to discharge or wear the antistatic gloves before the operation.
Manual IB-3810U3 - Close the front door until it has been locked and the HDD locks into the connector. If required, the door of each drive bay can be locked. - To remove a hard disk, carefully pull the handle of the front flap forward and loosen the internal connection of the hard disk so that you can then remove the drive. Note: - To protect the drives and the device, you can turn off each drive bay individually without disconnecting the other drives when you add or remove a drive.
Manual IB-3810U3 Windows® If the HDD is uninitialized, you may have to initialize it by doing steps as followed: At first click "Start", "Execute" on your PC and key in "diskmgmt.msc". After that please press "Return" key. 1. Start disk initialization Note: Please enable GPT if the total capacity is more than 2 TB and enable MBR if the total capacity is less than 2 TB. 2.
Manual IB-3810U3 3. Drive format completed macOS® If the HDD is uninitialized, you may have to initialize it by doing steps as followed: 1. Click "Disk Utility" icon. 2.
Manual IB-3810U3 3. Choose the appropriated drive and click ‚‘Erase‘‘ 4. Drive format in process 5.
Manual IB-3810U3 General Information Under Windows®, users can enable GPT when initializing drives with a total capacity of more than 2 TB. For macOS® users: the total capacity of more than 2 TB could be recognized only for the operation system is 10.4.11 Tiger or later. When the USB cable is plugged out or the host computer set to stnd-by or off, the device goes to stand-by mode automatically. Setting up motherboard‘s power management in S3 is recommended.
Handbuch IB-3810U3 Hauptmerkmale • Externes 10fach SINGLE System für 3,5» SATA I/II/III Festplatten • Festplattenkapazität unbegrenzt • Energiesparend durch automatischen Stand-by Modus für HDDs und Gehäuselüfter • EASY-Swap, einfache Handhabung durch trägerlose Festplatteninstallation! • Unterstützte RAID Level: SINGLE • Externe Datenschnittstellen: USB 3.0 mit UASP Unterstützung • Übertragungsraten: USB 3.
Handbuch IB-3810U3 Laufwerksinstallation Vor der Installation Hinweis! Um Schäden oder Fehlfunktionen zu vermeiden trennen Sie die Stromzufuhr des Gerätes bevor Sie die Festplatten installieren. - Beim Einsetzen der Festplatten achten Sie auf mögliche elektrostatische Entladung, da diese zu Schäden oder Fehlfunktionen führen kann. Berühren Sie vor der Installation ein „geerdetes“ Metallobjekt oder tragen antistatische Handschuhe.
Handbuch IB-3810U3 - Schließen Sie die Frontklappe bis die Verriegelung einrastet um die Festplatte vollständig zu verbinden - Bei Bedarf lässt sich die Tür eines jeden Laufwerkschachtes abschließen. - Zur Entnahme einer Festplatte ziehen Sie bitte vorsichtig den Griff der Frontklappe nach vorne und lösen so die interne Verbindung der Festplatte um dann das Laufwerk entnehmen zu können.
Handbuch IB-3810U3 1. Laufwerksinitialisierung starten. Hinweis: Aktivieren Sie den GPT Modus, wenn die Gesamtkapazität 2 TB übersteigt, bzw. den MBR Modus, wenn die Kapazität des Laufwerks kleiner als 2 TB ist. 2. Neue Partition erstellen und formatieren. 3. Laufwerksformatierung abgeschlossen.
Handbuch IB-3810U3 macOS® X Bei der Verwendung von unformatierten Laufwerken müssen diese unter Umständen zunächst initialisiert werden. Gehen Sie dabei bitte wie folgt vor: 1. Öffnen Sie das Festplattendienstprogramm. 2. Initialisieren Sie das Laufwerk mithilfe des Dienstprogrammes. 3. Wählen Sie das entsprechende Laufwerk und anschließend “Erase” (Löschen).
Handbuch IB-3810U3 4. Formatierung wird durchgeführt 5. Nach Abschluss der Formatierung. Allgemeine Hinweise Unter Windows® haben Sie die Möglichkeit die Option GPT zu aktivieren um Laufwerke größer 2 TB zu initialisieren und zu formatieren. macOS® Benutzer können erst ab dem Betriebssystem Tiger 10.4.11 oder höher auf Laufwerke größer 2 TB zugreifen. Wenn Sie das Schnittstellenkabel (USB) entfernen oder den Hostcomputer herunterfahren (Standby), schaltet das Gerät automatisch in den Stand-by Modus.
Handbuch IB-3810U3 Sollte der Lüfter oder das Gerät ausfallen, können Sie im Rahmen der Gewährleistungszeit eine Reparatur über Ihren Händler veranlassen.
© Copyright 2019 by RaidSonic Technology GmbH. All Rights Reserved The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reserves the right to make changes in the specifications and/or design of the above mentioned product without prior notice.