Manual

The LED indicator illuminates blue after the hard drive is inserted into the
drive bay. The LED will remain off if the drive bay is empty.
The LED indicator will flash blue during drive access.
The fan speed control can be switched for High, Low and Auto settings.
In High, the fan is at the maximum output, 60% of maximum in Low mode,
and in Auto mode, the fan speed will adjust according to the cooling
requirements of the drives.
The USB 3.0 and USB 3.0 port on the front of panel is made for external
device usage.ln order to make them function,please make sure to connect
the USB 3.0 and the USB 3.0 connector (for front USB 3.0 port) on the rear
to the motherboard.
The fan will turn on once a hard drive is inserted.
1
Package Contents
2
Front Panel Information
Fan Speed Control
USB 3.0
USB 3.0
HDD 1
Power Button
Power / Access LED Indicator
HDD 2
Power Button
Power / Access LED Indicator
HDD 3
Power Button
Power / Access LED Indicator
M3*6 screws x 8
User Manual x 1Device x 1 4 Pin to 15 pin
Power Connector
x 2
1
English