User manual

English
Back Panel Description
5.
<4-5> Overheat from original Temperature Detection Setting
•
HDD access signal is displayed.
•
Fan and alarm buzzer signals
will continuously flash.
If the fan fails or is disconnected, the LCD displays the followingǺ
<4-6> Fan Fail Alarm
•
HDD access and Fan signals are
displayed.
•
Temperature and alarm buzzer
signals will continuously flash.
Original detection set at 50.0ʚ(122.0ʛ), if temperature
detected overheats the original setting. Screen using ʚ
will display the followingǺ
FAN FAIL
TEMP FAIL
HDD ACCESS
POWER LED
Master/Slave
SATA
4 PIN
Remark: Buzzer and alarm symbol are disabled by pressing any buttons located at the front panel.
4