User's Manual

4. Push the transmitter TALK button to confirm. If you do not get a lcd display, please refer to the
Troubleshooting chart.
OPERATION
To Start a record (TALK MODE)
1. Press TALK button on the transmitter. The IN-USE indicator will light up solid when it finds a clear
channel.
2. Check the recording indicator (after the recorder is working).
To End a record (Standby Mode)
If you picked up the transmitter from the docking station:
♦Since the ID-2400TR features “Auto-Standby,” simply return the transmitter to the docking station to end
the record. The ID-2400TR will automatically go to standby mode.
If you picked up the transmitter away from the docking station:
♦ Press the TALK button to end the record if you were away from the docking station when you picked up
the record. The ID-2400TR will go to standby mode.
TROUBLE SHOOTING
SYMTPOM SOLUTION
No recording sign ♦Check for the line cord connectors at both endsthat they are pushed in firmly until
they click.(docking & recorder)
♦ IF you had a power failure or had unplugged the docking station,replace the
transmitter on the docking station for two to five seconds to reset the system.
No power on the
transmitter unit
♦Check the Li-ion battery pack connection inside the battery compartment on the
transmitter.
♦The transmitter rechargeable Li-ion battery pack may need to be charged.
Does not charge ♦Make sure the charging contacts on both the docking station and the transmitter
are in contact during charging.
♦The charging contacts may need to be cleaned with an alcohol-moistened cloth.
♦The Li-ion battery pack may need to be discharged first before a full charge.