User`s manual

ManualsBrandsID TECH Manualscomputers & electronicsOmni

Read Two-Digit Addendum

If enabled, the reader will decode the two-digit secondary symbol when it is

scanned with the primary symbol, and add the data to the end of the transmis-

sion. If not, any two-digit secondary symbol will be ignored.

SELECTION CODE: G1

Read Two-Digit Addendum K

Do Not Read Two-Digit Addendum L

Read Five-Digit Addendum

This option operates in the same manner as the Read Two Digit Addendum

option except it enables the reading of a ﬁ ve digit secondary symbol.

SELECTION CODE: G1

Read Five-Digit Addendum M

Do Not Read Five-Digit Addendum N

Addendum Required

If a two or ﬁ ve-digit addendum is enabled, then enabling this option will

require an addendum be present before a good read is registered. If not, then

symbols with and without the addendum will be accepted.

SELECTION CODE: G1

Addendum Required O

Addendum Not Required P

Add Separator Space

This option is used with the Two and Five-Digit Addendum options. If en-

abled, an ASCII space character is inserted between the data decoded from

the primary UPC symbol and the addendum symbol.

SELECTION CODE: G1

Add Space Separator Q

Not Add Space Separator R

Convert UPC-A to EAN-13

SELECTION CODE: G1

Do Not Convert to EAN-13 S

Convert to EAN-13 T

SELECTION CODE: G1

Do Not Read Two-Digit Addendum L

Read Two-Digit Addendum K

Do Not Read Two-Digit Addendum L

Read Two-Digit Addendum K

SELECTION CODE: G1

Read Five-Digit Addendum M

Do Not Read Five-Digit Addendum N

Read Five-Digit Addendum M

Do Not Read Five-Digit Addendum N

Read Five-Digit Addendum M

SELECTION CODE: G1

Addendum Required O

Addendum Not Required P

Addendum Required O

Addendum Not Required P

SELECTION CODE: G1

Add Space Separator Q

Not Add Space Separator R

Add Space Separator Q

Not Add Space Separator R

Add Space Separator Q

Convert UPC-A to EAN-13

Do Not Convert to EAN-13 S

Convert to EAN-13 T

Do Not Convert to EAN-13 S

Convert to EAN-13 T