User`s manual

26
EAN Settings:
Enable/Disable EAN-13
EAN-13 is a fi xed format symbology and there are no variations allowed. If
enabled, EAN-13 symbology will be read, subject to the reading restrictions
specifi ed by this set of options. If disabled, the data from the symbology will
be disregarded.
SELECTION CODE: G2
EAN-13 Enable A
EAN-13 Disable B
Enable/Disable EAN-8
If enabled, EAN-8 symbology will be read, subject to the reading restrictions
specifi ed by this set of options. If disabled, the data from the symbology will
be disregarded.
SELECTION CODE: G2
EAN-8 Enable C
EAN-8 Disable D
Send Induced Country Code Character
The EAN symbology adds an extra digit to the beginning of the data to create
a two-digit country code. If enabled, the added induced character is the fi rst
character transmitted. If disabled, the induced character is not transmitted.
SELECTION CODE: G2
Induced Character Enable E
Induced Character Disable F
Send Check Digit
The check digit is mandatory in the EAN symbology. If enabled, the reader
will send the decoded check digit as the last character in the data stream trans-
mitted. If not, the check character will be suppressed before transmission.
SELECTION CODE: G2
Send Check Digit G
Do Not Send Check Digit H
SELECTION CODE: G2
EAN-13 Enable A
EAN-13 Disable B
EAN-13 Enable A
EAN-13 Disable B
SELECTION CODE: G2
EAN-8 Enable C
EAN-8 Disable D
EAN-8 Enable C
EAN-8 Disable D
SELECTION CODE: G2
Induced Character Enable E
Induced Character Disable F
Induced Character Enable E
Induced Character Disable F
SELECTION CODE: G2
Send Check Digit G
Do Not Send Check Digit H
Send Check Digit G
Send Check Digit G
Send Check Digit G
Send Check Digit G
Do Not Send Check Digit H
Do Not Send Check Digit H
Send Check Digit G