User`s manual

Set the Sequence in which Data Fields are Sent
This command specifi es the order in which data fi elds are transmitted to the
host. Each separate fi eld is assigned an upper case alpha letter in the order in
which it is created. So the fi rst data fi eld created is A, the second is B, and so
on.
SELECTION CODE: JK
Characters Assigned to Data Fields in the Transmission Order Desired
EXAMPLE:
To transmit fi elds A, B, and C to the host so that the second and third data
fi elds are reversed, enter:
... JK<ENTER>A<ENTER>C<ENTER>B<ENTER> ...
This means that data fi elds A, B, and C will be transmitted as A, C, and B.
Time Delay
In addition to specifying the order in which data fi elds are transmitted to the
host, you can add a time delay between each fi eld. The amount of time delay
is two digits multiplied by 100 milliseconds. So if the time delay specifi ed is
“02” the time delay will be 200 milliseconds.
SELECTION CODE: JM
Two Digits for Time Delay
Delete One Formula
This command deletes a single formula stored in the reader’s memory. To do
this, you need to know the place the formula is stored in memory. In other
words, if the formula to be deleted is the third formula stored in the reader’s
memory, then you’ll need to enter the number 3.
SELECTION CODE: JS
One Digit to Indicate which Formula to Delete
40
SELECTION CODE: JM
Two Digits for Time Delay
SELECTION CODE: JK
Characters Assigned to Data Fields in the Transmission Order Desired
SELECTION CODE: JS
One Digit to Indicate which Formula to Delete