User`s manual

5. If UNMATCHED INPUT is set to SEND, the unmatched data is passed

on to the message processing section of the reader, where any previously-

deﬁ ned postamble, preamble, and terminator characters are added before

the data is sent to the output port.

Examples

EXAMPLE ONE

76440057320712

Symbology Code 128

Desired Output: Divide the input data record into two ﬁ elds with one con-

sisting of the ﬁ rst six digits and the second containing the remaining data.

The output should have a <ENTER> inserted after each ﬁ eld.

Formula ID h C 06 A <ENTER> SEND ACBC

Field List Field A 764400

Field B 57320712

Field C <ENTER>

Prior to data editing, enable the Function Code Selection on page 9.

Keystroke Sequence

Enter Data Editing Setup /E/D/FJ<ENTER>

Enable Data Editing JA<ENTER>1<ENTER>

Enter Code ID as h (for Code 128) JC<ENTER>h<ENTER>

Deﬁ ne ﬁ rst six characters as Field A,

and remaining data as Field B JF<ENTER>0<ENTER>

6<ENTER>

Enter Add Field C as the <ENTER> key JJ<ENTER>\<ENTER>

Deﬁ ne Field Sending Sequence of ACBC JK<ENTER>A<ENTER>

C< ENTER>B<ENTER>

C<ENTER>

Save Exit Setup JZ<ENTER>

Output Data 764400<ENTER>

57320712<ENTER>