Integration Manual

ID TECH VP3350 User Manual
Page | 21
7.9. Contact Set Terminal Data (60-06)
The Contact Set Terminal Data command creates new terminal data according to the TLVs passed in.
Terminal data is mandatory and seldom changes. It represents configuration data that usually gets
set one time in pre-production and never changes after.
Command Frame
Byte 0-9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14 …
Byte 14+n-1
Byte 14+n
Byte 15+n
Header Tag &
Protocol
Version
Command
Sub-
Command
Data
Length
(MSB)
Data
Length
(LSB)
Data
CRC (LSB)
CRC (MSB)
ViVOtech2\0
60h
06h
Data Objects
Data Objects: <TagCounterL><TagCounterH><TLV1><TLV2>…<TLVn>.
Where: <TagCounterL><TagCounterH>: the Number of <TLV> tags.
Response Frame
Byte 0-9
Byte 10
Byte 11
Byte 12
Byte 13
Byte 14 …
Byte 14+n-1
Byte 14+n
Byte 15+n
Header Tag &
Protocol
Version
Command
Status Code
Data
Length
(MSB)
Data
Length
(LSB)
Data
CRC (MSB)
CRC
(LSB)
ViVOtech2\0
60h
See Status
Code Table
See Response
Frame Data
Format
Note:
If a <TLV> format was bad, the response status code is 0x05. If flash error, the response status code
is 0x62.