User's Manual

VP5300M User Manual
Page | 19
6.4. VP5300M Connectors
#
Description
Cable
1
USB port
80171201-001, 4-pin USB cable
2
Antenna
80152236-001, connect to NFC antenna (ID-
80152002-003)
3
Power
80171204-001, 2-pin power cable, with adaptor
AC0005R-12
4
PINPAD
80141220-001, L100 cable
5
RS-232
80171203-001, 9-pin RS-232 cable
6
Ethernet
RJ-45 Ethernet cable
6.5. Attaching the Cables from the Antenna to the
VP5300M
1. Attach the SMB barrel end of the cable (80152236-001) from the
antenna to the SMB post of the VP5300M. The connector slides
on.
2. Attach the 8-pin end of the cable (80152235-001) from the
antenna to the VP5300M, where
the receptacle sits next to the RJ-45 (Ethernet) receptacle.
6.6. Connecting to Power
The VP5300M is powered through the power input connector.
1. Connect the 12V DC power supply (P/N AC0005R-12) with cable
80171204-001 to the receptacle on the bottom side of unit.
2. Plug the unit in to an AC outlet and verify that the VP5300M
lights up.
6.7. Connecting to the Data Port
Use 9-pin JST P/N PHR-9 (or equivalent) for the RS232 connector or 5-
pin JST P/N PHR-5 (or equivalent) for the USB connector. See diagrams
below for RS-232 or USB, as appropriate.