User's Manual

VP5300M User Manual
Page | 26
9. The device prompts to reenter the password. Enter the new
Password 2 again to confirm it. After entering the new Password 2
for a second time, the device beeps twice to confirm the input.
The SmartPIN L100 Removal Detection passwords are now set.
10. The next menu on the L100 screen has the option to Enable.
Choose the top option (scroll up or down using the * and # keys)
and press the green Enter key. The device displays an "Activate
Success" prompt to indicate success.
11.2. Setting up the VP5300M
To set up the VP5300M for chip-and-PIN operation, you will need to
configure the unit to operate in Configuration 3C. Out of the box, the
VP5300M uses the 4C configuration, which indicates the reader performs
EMV transactions without a PIN pad.
Switching the unit to a 3C configuration can be done easily with ID
TECH's free USDK Demo program on any Windows computer. Download the
free demo program from the VP5300M product section of the ID TECH
Knowledge Base (look for the USDK_DEMO zip file). No registration is
required.
1. Launch the USDK Demo program and plug the VP5300M into the USB port
of your computer. Verify that the VP5300M is shown as selected on
the left side of the window: