User's Manual

VP5300M User Manual
Page | 30
2. The VP5300M is now fully configured to do PIN-based transactions (if
the presented credit card supports them). Verify that the VP5300M’s
front removal detection switch is firmly pressed down. The pressure
switch is located on the front bezel’s left side and looks like a
small button on a white rubber square. If the unit is not mounted in
a kiosk or other fixture, temporarily engage the pressure switch by
attaching a binder clip to the left side of the flange:
3. Next, return to the L100 and power-cycle the PIN pad. You have only
2 seconds to start entering the special pairing command on the
keypad. To get into the special menu, press:
• Cancel
• Clear
• Enter
• Blank
• Clear
• Enter