User's Manual

VP5300M User Manual
Page | 31
4. The L100's front display now shows two options: Enable PIN Pad, and
Enable CR (in this case, CR means "card reader"). Use the # and *
keys to scroll up or down. Select Enable CR and press Enter.
5. Setup is now complete. Execute the Start EMV Transaction command in
the USDK Demo, or start a transaction from your own software, and
then insert a PIN debit card. After the prompt for PIN comes up, the
unit should display this:
Note: The test card must be a PIN-capable EMV card. We recommend
using the appropriate test card from a deck of test cards.