User's Manual
VP5300M User Manual
Page | 8
2. VP5300M: Electrical
Voltage requirement: 12V DC (minimum) is recommended, to 24V maximum.
Battery: The unit contains a small lithium battery to power the Real
Time Clock and certain anti- tamper features. This battery has a shelf
life of five years. The battery is not user replaceable. Do not
attempt to open the VP5300M for any reason; this will trigger the
anti-tamper features, causing the unit to become inoperable. If a
replacement battery is required, return the VP5300M to ID TECH.
Contact support@idtechproducts.com for more information.
2.1. VP5300M: Firmware
Feature
Support Function
Magnetic stripe
• Meets ISO 7810/ISO 7811 specification
Supports AAMVA format
• Supports JIS I/II card format
• Supports single, dual and triple
tracks; dual head.
Contactless
• EMVCo Contactless Level 1 & 2’s (listed
in Sec. 1.6)
• ISO 14443 Type A&B, MIFARE, ISO 18092
MIFARE: Classic, Ultralight C, DESFire,
DESFire EV1 supported via passthrough
mode
Contact
• EMVCo Contact Level 1 & 2 (L2 Common
Kernel)
Key injection
• Compatible with FutureX and Geobridge
HSMs for Data Key Injection
• Can communicate with HSM via RS232 port
• Support for RSA keys generation and
certificates loading Support for
Asymmetric TR-34 Remote Key Injection
Security
• PCI PTS SRED 5.X
• Supports ID TECH Encrypted Data Output
Format – 80000502-001
• Support multiple types of encryption
formats:
o TDES
o AES
o RSA-based TransArmor
• Supports Multiple Key management
techniques: DUKPT
• Master Session Key
• Secure firmware. Remote key injection,
and application download using PKI
• Secure commands (PKI) for configuring
device (RTC, whitelist, reset device,
etc.)
Command Set
• Reference the NEO 2 Interface
Developers Guide - 80139403-002