User's Manual

48
9.5.3 HOLIDAY CODE
9.5.4 READER#1 MODE TIME SCHEDULE
9.5.5 READER#2 MODE TIME SCHEDULE
READER#2 MODE TIME SCHEDULE setting is the same as 9.5.4 READER#1 MODE T/S setting.
☞. Holiday Code is to link the Holiday Schedule to the Time Schedule. T/S has 5 Time Intervals for holidays an
d
this Time Intervals are only applied to the dates of this Holiday Schedule. Default Holiday Schedule Code is
‘00’ which means no holidays are applied to T/S.
Use <4> or <6> key to scroll up and down the T/S Code (01~10) and press <ENT> key to enter 2digit Holida
y
Schedule Code and press <ENT> key to store Holiday Index to the memory.
Press <ESC> ke
y
to return to the menu.
☞. There are 2 system operating mode, RF Only Mode, RF+PW Mode. You can setup one of the system operating
mode from [F2 SETUP MODE]->[R1 MODE SETTING] menu. However, you want to apply differen
t
operating mode for a certain Time Interval for all users. For example, you want to access the door by jus
t
presenting the card for the time from 09:00 to 17:00 and you want to use Password for the rest of the time. I
n
this case, setup [R1 MODE SETTING] to RF+PW Mode which is for the system operating mode and progra
m
“01” T/S Code which includes a Time Interval 09:00-17:00 then link “01” T/S Code to this function, R1
MODE T/S setting here.
To link a T/S Code (01~10) to Reader#1 Mode, press <ENT> key. Enter 2digit T/S Code and press <ENT>
key to store T/S Code to R1 MODE to the memory.
Press <ESC> key to return to the menu.
. There are 3 system operating mode, RF Only Mode, ☞ ID + Finger Mode and ID + PW + Finger Mode.
You can select one of the system operating mode from [F2 SETUP MENU]->[READER#1 MODE SETTING]
however, you want to apply different operating mode
‘2’ – ID + Finger Mode
‘3’ – ID + PW + Finger Mode