User's Manual

9
Example: A. Holiday schedule 01 linked to time schedule 01,
Holiday schedule 02 linked to time schedule 02
B. Holiday schedule 02 linked to time schedule 01,
Holiday schedule 01 linked to time schedule 03
Forced Door Open Alarm
When the door is opened by force, the door contact sensor will be activated. For this application, you have to
install the door contact sensor and properly set the door contact time and outputs to the alarm devices. The
Forced Door Open Alarm will be generated until the alarm is cleared.
Door Open Overtime Alarm
The Overtime Door Open Alarm will be generated when the door is open continusly, after the door is opened
by corrected process.
The Overtime Door Open Alarm will be generated until the door is closed.
Anti-Pass-Back
By using an additional proximity reader, the Anti-Pass-Back mode can be set. The Anti-pass-back mode
prevents entry or exit when the registered user did not properly followed one entry and one exit by the Anti-
pass-back rule. The same user can not enter twice with the entry card without properly using the exit before.
Duress Alarm
In case of duress, enter the 2 digits Duress Password and press the<ENT> key before the normal access
process. The door can be opened as normal, but the duress alarm is also generated at the same time. The
duress alarm output will be activated to the TTL output and an alarm event will be sent to the host PC.