User's Manual

GE616 PROXIMITY READER
4. Installation
4-1. Mullion/Wall Mount
Drill two 6-32 or M3 holes 3.3"(8.38cm) apart in vertical and drill one 1/2" hole for
the reader cable 1.7"(4.31cm) apart from the top hole.
(If you have installed electric gang box then skip this step.)
4-2. Put reader cable into the center hole and install the reader module by using two
6-32 or M3 screws.
4-3. Put bezel into the reader module then push bezel until you hear the locking sound.
MANUAL 20050308 - 4 - GE616