User's Manual

3
1. Important Safety Instructions
When using RF245, basic safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to persons.
In addition, the following safety guides should also be followed:
1. Fully read and understand all instructions and follow them completely.
2. Follow all warnings and instructions marked on the product.
3. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
If necessary, use mild soap.
4. Do not use this product near water.
5. Only operate this product using the type of power source indicated.
If you are not sure of the type of power supplied to your installation site,
consult your dealer of local power company.
6. Never insert objects of any kind into the product or through the cabinet
slots as they may touch voltage points and/or short circuit parts possibly
resulting in fire or electric shock. Never spill liquid of any kind on the
product.
7. Never disassemble this product by yourself; take the unit to a qualified
service center whenever service or repair is required. Opening or removing
the covers may expose you to dangerous voltages or other risks.
Also, incorrect reassembly can cause electric shock when the unit is
subsequently used.
8. Unplug this product from the Direct Current (DC) power source and refer to
qualified service personnel under these conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled on the product.
c. If the product does not operate normally after following the operating
instructions in this manual. Adjust only those controls that are
covered by the operating instructions in this manual. Improper
adjustment of other controls that are not covered by this manual may
damage the unit and will often require extensive work by a qualified
technician to restore normal operation.
d. If the product exhibits a distinct change in performance.
2. General
The RF245 is a 2.402GHz Long Range Reader for outdoor use and the read
range of RF245 is maximum feet (10 meter) with IDA245 active tag.
The RF245 can be used for various applications such as Hands Free Access
Control, Parking Control, Personal Tracking and Factory Automation.
The RF245 supports various output formats, 26bit Wiegand output, RS232
serial output and BARGATE output.
There are optional Mounting Bracket and Reader Hood for easy installation.
The RF245 has automatic setup for Channel setting, Site Code setting when
it powered up. Red color LED and built-in Beeper assures its accurate and
reliable system operation.