User's Manual

21
7.5.5 EXTERNAL READER CONNECTION
 Proximity Reader Connection
1. Connect the DC+12V wire of Power Supply to (+) wire of reader.
2. Connect the GND(-) of Power Supply to (-) wire of reader
3. Connect the Wiegand Data 0 wire of the External Reader to the Wiegand Input Data 0 wire
of LX006 (Pink wire).
4. Connect the Wiegand Data 1 wire of the External Reader to the Wiegand Input Data 1 wire
of LX006 (Cyan wire).
5. The GND(-) wire must be connected between the external and the LX006.
 Compatible Reader:
LX006:
Standard 26bit Wiegand proximity reader
Standard 26bit Wiegand + 4/8bit burst proximity/ keypad reader
LX006SR:
Standard 34bit Wiegand proximity reader
Standard 26bit Wiegand + 4/8bit burst proximity/ keypad reader
(Figure: External Reader Connection)
POWER
ACU