User's Manual

29
error signal is not generated when using ABA Track II format.)
 If the card hasn’t yet been registered,
1. The buzzer generates 2 short beeps and the Yellow LED blinks twice to indicate that the presented
card is unregistered or deleted.
2. When an unregistered card is presented or a fingerprint is not verified, an Access Error Signal
output (Low Active) will be generated for 500ms. (The error signal is not generated when using
ABA Track II format.)
10.4 READER INDICATOR
LED
BEEP
VOICE MESSAGE
STATUS
1
WELCOME TO ACESS
CONTROL SYSTEM
Power is applied and the LX006 is booting up.
X
SYSTEM INITIALIZED
The initialization has been finished.
REGISTRATION MODE
X
MASTER ID REGISTRATION
MODE
In the status of system initialize. The card
recognized in this status, it becomes Master
card.
X
REGISTRATION AND
DELETION MODE,
PRESENT A CARD
User card registration/deletion is available
3
BEEPS
ID REGISTERED
User card registration successfully completed
3
BEEPS
FINGERPRINT REGISTERED
User card/Fingerprint registration successfully
completed
2
BEEPS
FINGERPRINT REGISTRATION
FAILED, PLEASE TRY AGAIN
User card/Fingerprint registration is failed
4
BEEPS
ID DELETED
User card/Fingerprint deletion successfully
completed
READER MODE
X
READER MODE
The LX006 is in its normal status, waiting for a
User Card to be presented.
1 BEEP
ACCESS GRANTED
Authentication completed
2
BEEPS
ACCESS DENIED,
PLEASE TRY AGAIN
Authentication failed
4
BEEPS
ID UNREGISTERED
Unregistered person