User's Manual

5
2. FEATURES
 Fingerprint Recognition Proximity Reader
The LX006 is a Fingerprint and Proximity Reader compatible with existing proximity readers. The
LX006 has a built-in proximity reader and fingerprint module so that the access is only allowed when
the personal ID and fingerprint are authorized and this integrated system gives you high and reliable
security. The LX006 can register up to 200,000 User IDs and 1,000(default)/ 2,000(optional) /
4,000(optional) fingerprint users.
 Easy Installation
LX006 can be easily installed on flat wall or the door frame.
 1:1 Verification and 1:N Identification
User can select operation mode between 1:1 Verification and 1:N Identification for his convenience.
 RF Only Mode and RF + FINGER Mode
The LX006 has two operation modes when it is operated as a reader.
- RF Only Mode
In the RF Only Mode, only card authorization is needed to grant access. If a card is authorized,
the corresponding card ID will be transmitted to the controller.
- RF + FINGER Mode
In the RF + Finger Mode, both card and fingerprint authorization is needed to grant access. If a
fingerprint is authorized, the corresponding card ID will be transmitted to the controller. If user’s
fingerprint is not registered, the mode is automatically working as ‘RF Only’
 Network Communication
The LX006 can establish network communication via RS232 / RS485 and built in TCP/IP internal
module.