User's Manual

20
• Compatible Readers (External Reader):
Star LX505:
Standard 26bit Wiegand Format Proximity Readers
Standard 26bit Wiegand + 8bit Burst Format Proximity and keypad Reader
IDTECK LX505SR:
Standard 34bit Wiegand Format Proximity Reader
Standard 34bit Wiegand + 8bit Burst Format Proximity and keypad Reader
• Recommended Readers
Star LX505: RF TINY, RF10/20/30/70/500, RFK101, FGR006, FGR006EX
iPASS IP-LX505: IP10/20/30, IPK101
IDTECK LX505SR: SR10/20/30, SRK101, FGR006SRB
Figure: External Reader Connection
9. Communication
9.1 RS232 Communication Port Connection
A 9-pin connector (Serial communication connector, female) is required to connect the LX505
with a host computer via RS232 communication.
Please follow the steps below.
1. Connect RS232-TX, Black wire with white stripe to the pin #2 (RXD) of the 9-pin connector.
2. Connect RS232-RX, Red wire with white stripe to the pin #3 (TX) of the 9-pin connector.
3. Connect GND, Black wire to the pin #5 of the 9-pin connector.
4. Plug in the 9-pin female connector to COM1 or COM2 Port of the host PC.
5. Install and run the LX505 Application Software.