User's Manual

b) Registration Using Keypad

NOTE| In case you make a typing mistake during the registration process, you can press F1

button to erase your errors.

1. Scanning – means the reader is waiting for an ID number to be entered. The card number

for the card will appear with a beep sound when you present the card.

2. ID – is a Personal Identification Number (PIN) that consists of 4-8 digits. Enter a 4-8digit ID

number (PIN) and press <ENT> key. (For LX505SR, the ID number consists of 4-10 digits.

3. PW – stands for a password that is required for verification in the RF + Password operating

mode.

4. TA – refers to the Time Schedule code (‘00’ ~ ‘10’) for the Reader#1 (i.e. the built-in

reader). Cardholders are granted access only during the Time Intervals of the Time

Schedule code entered to this TA field. To set the Time Intervals for each Time Schedule

code, refer to the instructions on the Time Schedule Setup in the [F4 SETUP MENU]. If

you want allow the cardholder access to the door anytime, then enter the default Time

Schedule code '00' for the value.

5. TB – refers to the Time Schedule code (‘00’ ~ ‘10’) for the Reader#2 (i.e. Exit Reader).

Cardholders are granted access only during the Time Intervals of the Time Schedule code

entered to this TB field. To set the Time Intervals for each Time Schedule code, refer to the

instructions on the Time Schedule Setup in the [F4 SETUP MENU]. If you want allow the

cardholder access to the door anytime, then enter the default Time Schedule code '00' for

the value.

6. RD – refers to the Reader Assignment code for the cardholder. Entering the code ‘0’

assigns both readers (Built-in Reader and Exit Reader) to grant access to the user that is

being registered, code ‘1’ only assigns Reader#1 (Built-in Reader) and code ‘2’ assigns

Reader#2 (Exit Reader). If you enter ‘1’ in the RD field(Only Reader#1 assigned) and try to

exit through Reader#2 (Exit Reader) then LX505 generates an error message (“Access Door

Error”) on the LCD display.