User's Manual

33
12.1.4 Reader #2 Mode
The READER#2 MODE setting menu is the same as READER#1 MODE setting menu in
the previous section.
12.1.5 Reader #1 PIN Input
12.1.6 Reader #2 PIN Input
READER#2 PIN INPUT setting can be configured in the same way as READER#1 PIN
INPUT setting in the previous entry
12.1.7 Communication Address Setting
This setting allows you to decide whether to USE or NOT USE the keypad inputs for the
Reader#1.The default setting is NOT USE the keypad inputs. If you want to access the door
by entering the user ID by keypad, set this mode USE.
Note: Set this mode to USE when you use the password verification method.
Note: READER#1 is
t
he Exit Reader connected to the LX505.
ID ONLY: In this mode, users can exit/enter the door by simply presenting their card or
entering their ID number.
ID+P/W: In this mode, users can exit/enter the door by presenting their card or entering
their ID number and then verif
y
in
g
their identit
y
throu
g
h a
p
assword.